Verified Footwear Outsole Factory Equipment
Jinjiang WENCHANG Footwear Materials Co., Ltd. Operates an approximately 1,550 m2 outsole production facility in Jinjiang, Quanzhou. The site includes five defined operating areas and three sets of TPR rotary-disk injection machines. This evidence helps purchasing managers, brands, importers, distributors and footwear factories assess facility fit remotely.
Verified Footprint of the Jinjiang Outsole Facility
Our facility is located in Jinjiang, Quanzhou, and covers approximately 1,550 m2. This footprint includes five confirmed operating areas: an office, a raw-material storage warehouse, an outsole production line, a finished-goods warehouse and a quality-inspection zone. These areas give remote supplier-review teams a clear view of the physical functions represented at the site. Materials can be held in a defined storage area, outsole production has an identified line, completed goods have a separate storage function, and inspection has a dedicated zone. The office supports project administration and communication. The stated floor area describes the overall facility footprint. It does not indicate the size of each area, the length of the production line or the physical arrangement between the different zones.
How the Five Factory Areas Support Outsole Operations
A remote capability review should distinguish between confirmed physical areas and assumptions about how a factory may be arranged. The following map lists only the areas documented within our Jinjiang facility and their basic operating roles. This functional map does not imply specific warehouse controls, room dimensions, environmental systems or automated material handling. Buyers with requirements in these areas should state them directly when requesting further facility information.
Office
Project administration and communication — Provides a defined area for coordinating buyer information and production-related follow-up.
Raw-Material Storage Warehouse
Storage of incoming production materials — Confirms that incoming materials have an identified storage function within the facility.
Outsole Production Line
Production area for footwear outsoles — Shows that outsole production has a dedicated operating area.
Finished-Goods Warehouse
Storage of completed goods — Separates the finished-goods storage function from incoming material storage.
Quality-Inspection Zone
Inspection of materials or completed production — Confirms that quality inspection has an identified physical area at the site.
Confirmed TPR Rotary-Disk Injection Equipment
WENCHANG has three sets of TPR rotary-disk injection machines at its Jinjiang outsole production facility. These machines are the specifically documented injection equipment for reviewing our TPR outsole production capability. This equipment statement identifies the machine type, quantity and material relationship. It does not make claims about machine brands, model numbers, operating speed, age, automation level or technical specifications. If any of those factors affect your supplier assessment, include the relevant question and product requirement in your enquiry. Buyers who need the production-stage context for this equipment can review our dedicated TPR rotary-disk injection moulding capability . That resource covers the associated operating stages without requiring the facility evidence on this page to be treated as a full process description.
Match the Equipment Evidence to the Required Outsole Material
The three confirmed rotary-disk injection machines are identified for TPR. This relationship is important because a list of materials supplied by a company does not, by itself, confirm that the same equipment is used for every material. We supply outsole projects involving TPR, RB rubber, MD Phylon, PU and ETPU combined constructions. However, the named injection equipment on this page applies specifically to TPR. We do not assign unverified machines or production lines to RB rubber, MD Phylon, PU or ETPU combined outsoles. For a useful equipment-fit review, identify the required material and construction at the start of the discussion. If the material is still under evaluation, describe the footwear application, outsole reference and required process rather than assuming that TPR equipment is relevant.
For a TPR Outsole:
Ask how the documented rotary-disk injection equipment relates to your product design and required process.
For Another Outsole Material:
Request a separate capability review instead of using the TPR equipment statement as evidence.
For a Combined Construction:
Identify each material and explain the intended outsole structure so the production requirements can be assessed.
A Dedicated Zone for Quality Inspection
A quality-inspection zone is one of the five confirmed operating areas within the approximately 1,550 m2 facility. Its presence provides physical evidence that inspection has an identified place within the Jinjiang operation rather than being represented only as an administrative activity. Our documented inspection framework includes incoming material inspection, first-article review, in-process checks and final inspection. These controls relate to different points in production, but their detailed methods are outside the facility and equipment scope of this page. Buyers evaluating inspection procedures, physical test items or chemical testing support should use our footwear quality control and testing hub. Project-specific test requirements should also be stated when asking whether our facility setup fits the intended outsole programme.
Questions to Use in a Remote Factory Review
Facility size and machine count are useful evidence, but they do not confirm project fit on their own. A remote review should connect the physical setup to the outsole specification and the buyer’s technical concerns. Use the following questions to prepare a focused review: This approach keeps the discussion tied to verified facility evidence while allowing our team to identify where more project-specific information is needed.
What Outsole Material Is Required?
Confirm whether the project uses TPR, RB rubber, MD Phylon, PU, ETPU combined materials or another specified construction.
Which Production Process Applies?
State the required process rather than assuming that the named TPR injection equipment suits every outsole.
What Is the Mould Status?
Identify whether an existing mould, a new mould or customer-owned tooling is involved.
Which Sizes Must Be Covered?
Provide the intended size run so tooling and production-fit questions can be reviewed in context.
What Product Quantity Is Under Review?
Give the project quantity as background for the capability discussion without treating facility area or machine count as a scheduling commitment.
Which Testing Requirements Apply?
Name the required physical or chemical test items and any acceptance criteria set by your project.
Are There Equipment-Specific Concerns?
Ask directly about any machine characteristic or production condition that matters to your internal supplier-review process.
Information Needed for an Equipment-Fit Enquiry
When asking whether our facility and equipment suit an outsole project, provide enough information to connect your design with the relevant production resources. A useful capability enquiry includes: We can then review the relationship between your requirement, the Jinjiang facility and the confirmed TPR injection equipment. If your project specifications are complete and you are ready for commercial assessment, submit them through our footwear and outsole quotation request page.
The Footwear or Outsole Product Type;
Artwork, a Technical Drawing or a Product Reference;
The Required Outsole Material or Production Process;
The Proposed Quantity and Size Run;
The Required Colour;
The Status of Any Existing or Customer-Owned Mould;
Applicable Physical or Chemical Testing Requirements; And
Specific Questions About the Factory Areas or Equipment.
Factory Facility and Equipment FAQ
Jinjiang WENCHANG Footwear Materials Co., Ltd. Operates its outsole production facility in Jinjiang, Quanzhou. No additional street address, industrial park location or transport-distance claim is represented by this facility summary. The Jinjiang facility covers approximately 1,550 m2. Its five confirmed areas are the office, raw-material storage warehouse, outsole production line, finished-goods warehouse and quality-inspection zone. The stated area is an approximate overall footprint rather than a measurement for any individual zone. The confirmed TPR production equipment consists of three sets of TPR rotary-disk injection machines. This statement does not specify machine brands, models, operating speeds, age or automation level. No such relationship is confirmed on this page. We also supply RB rubber, MD Phylon, PU and ETPU combined outsoles, but the three named rotary-disk injection machines are identified specifically for TPR. Other material projects require a separate process and capability review. Yes. A quality-inspection zone is one of the verified physical areas within the facility. Our wider quality framework includes incoming material inspection, first-article review, in-process checks and final inspection. Detailed inspection and testing information is available through the quality hub. Provide the product type, artwork or reference, material or process, quantity, size run, colour, mould status and testing requirements. You should also identify any equipment details or facility conditions that are important to your supplier assessment.
Where Is WENCHANG’s Footwear Outsole Production Facility Located?
Jinjiang WENCHANG Footwear Materials Co., Ltd. Operates its outsole production facility in Jinjiang, Quanzhou. No additional street address, industrial park location or transport-distance claim is represented by this facility summary.
How Large Is the Facility, and Which Areas Are Confirmed?
The Jinjiang facility covers approximately 1,550 m2. Its five confirmed areas are the office, raw-material storage warehouse, outsole production line, finished-goods warehouse and quality-inspection zone. The stated area is an approximate overall footprint rather than a measurement for any individual zone.
What Outsole Production Equipment Is Confirmed for TPR?
The confirmed TPR production equipment consists of three sets of TPR rotary-disk injection machines. This statement does not specify machine brands, models, operating speeds, age or automation level.
Does the Named TPR Equipment Also Apply to Rubber, MD Phylon, PU and ETPU Combined Outsoles?
No such relationship is confirmed on this page. We also supply RB rubber, MD Phylon, PU and ETPU combined outsoles, but the three named rotary-disk injection machines are identified specifically for TPR. Other material projects require a separate process and capability review.
Is There a Dedicated Quality-Inspection Area?
Yes. A quality-inspection zone is one of the verified physical areas within the facility. Our wider quality framework includes incoming material inspection, first-article review, in-process checks and final inspection. Detailed inspection and testing information is available through the quality hub.
What Should I Provide When Asking Whether the Factory Setup Fits My Project?
Provide the product type, artwork or reference, material or process, quantity, size run, colour, mould status and testing requirements. You should also identify any equipment details or facility conditions that are important to your supplier assessment.
FAQ
Frequently Asked Questions
Jinjiang WENCHANG Footwear Materials Co., Ltd. Operates its outsole production facility in Jinjiang, Quanzhou. This summary does not provide an additional street address, industrial park location or transport-distance claim.
The Jinjiang facility covers approximately 1,550 m2. Its five confirmed areas are the office, raw-material storage warehouse, outsole production line, finished-goods warehouse and quality-inspection zone. The stated area is an approximate overall footprint, not a measurement for any individual zone.
The confirmed TPR production equipment consists of three sets of TPR rotary-disk injection machines. The statement does not specify machine brands, models, operating speeds, age or automation level.
No such relationship is confirmed here. WENCHANG also supplies RB rubber, MD Phylon, PU and ETPU combined outsoles, but the three named rotary-disk injection machines are identified specifically for TPR. Other material projects require a separate process and capability review.
Yes. A quality-inspection zone is one of the verified physical areas within the facility. WENCHANG’s wider quality framework includes incoming material inspection, first-article review, in-process checks and final inspection.
Provide the product type, artwork or reference, material or process, quantity, size run, colour, mould status and testing requirements. Also identify equipment details or facility conditions that are important to your supplier assessment.
Discuss the Facility Evidence for Your Outsole Project
Send us your outsole specification and the exact capability points you need to verify. We will use the available facility and equipment information to review the fit between your project and our Jinjiang operation. Ask a factory capability question